{
  "id": "box-hinges-and-latches",
  "sku": "box-hinges-and-latches",
  "title": "Antique Bronze Box Hinge and Latch Set",
  "slug": "box-hinges-and-latches",
  "price": 19.99,
  "currency": "GBP",
  "availability": "in_stock",
  "category": "lid-table-and-glass-hinges",
  "category_label": "Lid, Table & Glass Hinges",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "160 g",
  "images": [
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/main-box-hinges-and-latches.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-2.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-3.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-4.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-5.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-6.jpg",
    "https://hingecompany.co.uk/dropship-images/lid-table-and-glass-hinges/box-hinges-and-latches/box-hinges-and-latches-7.jpg"
  ],
  "description_short": "Small face-mount hinges, hook latches and included screws help you finish lightweight wooden box projects.",
  "description": "A wooden box can be neatly made and still feel unfinished without the right fittings. The lid needs to open freely, the closure needs to meet, and the hardware should suit the scale of the box. Oversized fittings can crowd a small project. Hardware that is too light for the lid creates a different problem.\n\nThis box hinge and latch set is intended for the smaller, lighter end of box making. It brings together compact hinges, hook hasp latches and matching screws with an antique bronze appearance. Before choosing it, look beyond the finish. The dimensions, screw length and low-force use matter just as much.\n\nStart with the box you are making\n\nThink about how the finished box will be used. A small trinket box opened occasionally has different needs from a heavy storage chest. The supplier describes these fittings as thin hardware for applications that need little strength or locking force.\n\nThat makes lightweight craft projects the relevant starting point. Jewellery boxes, gift boxes and small keepsake boxes are all listed uses. It does not make the set suitable for every box in those groups. A large jewellery box with a thick, heavy lid may still need stronger hinges.\n\nAlso consider what you expect from the closure. A hook latch can provide a way to close the box, but this product has no stated security rating. If preventing access is part of the brief for your project, choose a closure designed and rated for that purpose.\n\nKnow what comes in the pack\n\nThe set contains 40 hinges and 20 hook hasp latches, plus matching screws. That gives you enough fittings for 20 boxes if each design uses two hinges and one latch. A different layout will change how far the pack goes.\n\nThe supplier description lists 240 screws. Keep the parts sorted while you work, particularly if you are making several boxes together. Small screws are easy to lose among timber offcuts or sanding dust.\n\nFor a batch of gift boxes, make and test one complete box before marking the rest. This lets you check the lid movement and latch position with the actual fittings. It is easier to revise one layout than to repair repeated holes across a whole batch.\n\nCheck both sets of dimensions\n\nThe hinges measure 24 x 18 mm. The latches measure 32 x 27 mm. These are separate measurements for different parts, not one overall size for the whole set.\n\nA quick paper outline can help you judge the footprint. Place it where the hardware will sit and check that it does not crowd an edge, carved detail or trim. This is especially useful when choosing miniature box hinges for a narrow rear face.\n\nThe latch needs space across the joint between the lid and body. Both parts need a firm mounting area, and they must meet when the lid is closed. A curved edge or raised moulding may make a simple-looking position harder to use.\n\nHole spacing is not provided. If you are replacing old hardware, do not assume that a similar outer size means the screw holes will match. Compare the actual fittings before making changes to the box.\n\nUnderstand the finish and material information\n\nThe appeal of antique bronze hardware is often visual. It can suit a vintage-style craft box or add a darker detail to plain timber. The product details list an oil-rubbed finish, while the descriptive text refers to an antique bronze appearance.\n\nTreat that as a finish description, not proof of solid bronze construction. The supplier's material information is inconsistent. Its details table lists bronze, while its descriptive text names zinc alloy and iron with a decorative coating.\n\nIf the precise base metal matters to your project, ask for clarification before ordering. This is important for buyers trying to match existing fittings or meet a particular material requirement.\n\nColour also deserves a practical check. Review the images beside your chosen timber finish, while allowing for differences between screens and lighting. The term antique bronze does not guarantee a match with hardware bought elsewhere.\n\nChoose for light duty, not appearance alone\n\nThe supplier lists a material thickness of 0.2 mm and describes the fittings as suitable for low-strength applications. That is a useful limit to keep in mind. A decorative hinge can look right on a box while still being wrong for its lid weight.\n\nThere is no stated load capacity. Do not estimate one from the hinge dimensions or the number of screws. For a heavy lid, use hinges with a clear rating and consider whether the design also needs a lid support.\n\nThese hinges have no specified stay-open function. Do not assume they will hold a lid at a chosen angle or stop it falling shut. Plan the opening movement as part of the box design rather than asking the hinge to do an unstated job.\n\nThe same caution applies to small cabinet hinges. The supplier mentions small cabinets, but that is not a general approval for cabinet doors of any weight or size.\n\nCheck the screws against your timber\n\nMatching 8 mm screws are included. Before fitting them, compare their length with the thickness of the wood along the intended screw path. Thin box walls need particular care because a screw tip may come through the inside.\n\nThe hardware itself takes up some of the screw length, but do not rely on a rough guess. Check the actual parts together. If the supplied screws are unsuitable for your construction, get advice on an appropriate alternative rather than forcing the fit.\n\nUse a screwdriver that sits properly in the screw head. Work slowly and avoid overtightening. A damaged head makes later adjustment harder, and a stripped hole may leave the fitting loose.\n\nWhere suitable for the timber, a correctly sized pilot hole can help guide the screw. Test your method on scrap material first if you are unsure how the wood will respond.\n\nFit the hinges before the latch\n\nStart with a lid that sits squarely on the box. Hold it in its intended closed position and mark the hinge locations carefully. The aim is free movement without the lid shifting sideways or rubbing against the body.\n\nFace mount box hinges attach to the surface. Even so, the position needs thought. Check clearance through the opening movement before committing to every screw hole.\n\nFit cautiously and test as you go. Open the lid gently, close it again and look for binding. If something catches, find the cause before adding force. Hardware should not be used to pull a poorly fitting lid into place.\n\nOnce the hinges establish the lid position, move to the latch. This order gives you a more reliable reference than marking the front closure while the lid is still loose.\n\nAlign the hook hasp without tension\n\nThe hook hasp latch has two mating parts. Their positions need to match with the lid resting naturally closed. Do not pull the lid down or sideways just to make the hook engage.\n\nHold the parts in place and test the movement before fixing the second part fully. The hook should meet its matching opening without being forced. If the lid moves when you close the latch, check the alignment again.\n\nThis matters when fitting wooden box latches to handmade work. Small differences in the lid joint can affect how the closure feels. Careful marking is usually more useful than tightening the screws harder.\n\nA small box clasp is a closure, not a repair for a warped lid or uneven box. Fix the underlying fit first so the hardware is not left under constant strain.\n\nReplacing existing box hardware\n\nA replacement jewellery box latch needs more than a similar look. Measure the old fitting, inspect its mounting holes and check the timber around them. Loose or damaged holes may need attention before a new fitting can hold properly.\n\nFor replacement hinges, consider the way the original lid opened. A different hinge shape or mounting position can change clearance at the back edge. Test with care rather than assuming the new hinge will follow the same path.\n\nNew fittings may also leave old marks visible. Compare footprints and finish before drilling. On a sentimental keepsake box, it may be worth asking a repair specialist before making changes that cannot easily be undone.\n\nCare for the finished fittings\n\nUse a soft, dry cloth for routine cleaning. Avoid abrasive pads and harsh cleaners that could mark the decorative surface. Keep the hardware dry rather than soaking the assembled box.\n\nCheck screws from time to time, especially if a box is used often. If one loosens repeatedly, inspect the wood and hole instead of simply tightening it again.\n\nOpen the lid gently and stop if the latch catches. A change in alignment is a reason to inspect the fittings. Forcing small hardware can turn a minor adjustment into a repair.\n\nNo outdoor-use rating is provided. Keep that uncertainty in mind if you are considering birdhouse work or another project exposed to weather.\n\nThe short version\n\nChoose this set for compact, lightweight box projects where an antique bronze look suits the design. It includes 40 hinges, 20 hook hasp latches and matching 8 mm screws.\n\nCheck the 24 x 18 mm hinge size, the 32 x 27 mm latch size and your timber thickness before buying. Allow for the unknown hole spacing and unconfirmed base material. For heavy lids, security needs or weather exposure, look for hardware with clear ratings for the job.",
  "llm_summary": "This BDS-HOME box hinge and latch set, model B-Hinges-60, contains 40 hinges, 20 hook hasp latches and matching screws. Hinges measure 24 x 18 mm, latches measure 32 x 27 mm and the supplied screws are 8 mm long. The supplier description lists 240 screws and a material thickness of 0.2 mm. The finish is described as oil rubbed with an antique bronze appearance. Intended uses include lightweight jewellery boxes, gift boxes and small craft projects. Item weight is listed as 160 g. Material descriptions conflict between bronze and coated zinc alloy and iron, so the base material is not confirmed. Load capacity, country of origin and warranty are not listed by the maker.",
  "returnable": true,
  "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; the Consumer Rights Act 2015 for faulty goods. Return postage on faulty goods is ours.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Hinge Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://hingecompany.co.uk/box-hinges-and-latches/",
  "canonical_url": "https://hingecompany.co.uk/box-hinges-and-latches/",
  "json_url": "https://hingecompany.co.uk/api/products/box-hinges-and-latches.json",
  "updated_at": "2026-10-19"
}